|
The newly developed vacuum drying oven: thanks to the technological achievement of the tank-heating field, we are able to innovatively solve the problem of the finding the best heat transmission process.
Usage description of the vacuum drying oven:
This product is designed for dryness and heat sensitive material, decompose-prone and oxidation-prone material. It is able to infuse inert gases and also quickly dry up complex structured articles.
Features of the vacuum drying oven:
1. Rectangular working tank maximized working volume, precise computerized temperature control.
2. Double deck steel glass that is anti-bullet structured enable observation.
3. Tank door is adjustable in pressure. The wholly processed silicon rubber seal gasket providing a high vacuum condition.
4. Stainless steel plate working chamber ensures the longevity of the product.
5. Storage, heating, experiment and drying process are all carried out in a non-oxygen environment filled with inert gases in case of oxidation.
6. Short heating time, 50% less time consumption than traditional way.
7.Vacuum environment greatly reduces the boiling point of liquid which needs to be fighted off,so, a Vacuum Drying Oven can be applied in heat-sensitive substance easily.
8.For some uneasy-dried samples, such as colloids, powder and other granules, Vacuum Drying Ovens can shorten their drying time.
9.All kinds of machines with complicated and porous structure will without any residual stains after being washed by vacuum drying oven.
10.Use safer - in a vacuum or inert conditions, it will make the explosion impossible when oxide meets high heat.
11. Compared with air circulation relied on Drying Oven, the powder sample will not be blowed and moved by flowing air.
Optional parts of the vacuum drying oven:
1. Intelligent programmable temperature control device.
2. Vacuum pump (120L/min)
3. Tank stand
4. Filter
Specifications:
Type |
DZF-6210 |
DZF-6090 |
DZF-6050 |
DZF-6020 |
Power supply |
220V 50Hz |
Input power |
1500W |
750W |
1400W 250W |
Temperature scale |
RT+10~250°C |
Temperature fluctuation |
1% |
Vacuum rate |
< 133Pa |
Core dimension |
560×640×600 |
450×450×450 |
415×345×370 |
300×300×275 |
Overall dimension |
720×820×1750 |
610×680×1460 |
710×560×550 |
590×490×450 |
Supporting board |
Three (independent temperature control) |
two (independent temperature control) |
two/three |
one/two |
Working chamber material |
Stainless steel(1Gr18Ni9Ti) |
Cold rolling sheet(08F) Stainless steel(1Gr18nI9tI) |
|
|
